A 74VHC74 can clock from DC to 175MHz, if you can get your signal to TTL=20
levels.


On 5/5/2014 8:11 AM, Martin K wrote:
> On 5/4/2014 9:13 PM, Thomas Sefranek wrote:
>> Think pre-scaler
>>
>> http://www.onsemi.com/pub_link/Collateral/MC12080-D.PDF
>>
>>
> Tom, thank you for the reply.
>
> Most prescalers I have seen are for several GHz, however I just looked
> again and found several Hittite parts that claim to be good down to DC.
> I was initially avoiding parts that claimed to work to several GHz (out
> of misunderstanding, perhaps)
>
> On closer analysis, the Hittite parts' websites claim to be good for DC
> - several GHz, however the datasheets do not recommend operation < 200
> MHz when using a sine wave.
>
> -
> Martin
>
>

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.