I have the Microstick II and have been using it quite successfully.

However, there is one thing I can't figure out - the little switch on
the side. The schematic shows it selects either PGEDA/PGECA or
PGEDB/PGECB as the load/debug interface.

If I switch to the "D" interface, the programmer can't talk to the chip.

I wanted to use the RB0 and Rb1 ports (which are also PGEDA/PGECA pins)
for something else.

Thoughts?
--=20
Larry Bradley =20
Orleans (Ottawa) Canada=20


--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.