Hi James, It is a SMD package with two large pads. I can probably take a picture if that will help. Thank you. Best Regards Luis On 11 Feb 2014 18:30, "James Holland" wrote: > > > From: Luis Moreira luis.moreira1575@googlemail.com > > Subject: [EE]: component info > > > Hi Guys, > > Looking for some info on an SMD inductor with markings 1R1 and M07. > > This is from a hardrive board. My friend as damaged it removing it from > is > > computer and now it will not work, as I don't see any other damage I > would > > like to replace it and see if it will work long enough so he can extrac= t > > the info from it. > > Before the comments start comming in, this hard drive does genuinely > > belongs to my friend and I am not trying to hack into someones hard dri= ve > > that I found laying around... > > Thank you. > > Best Regards > > Luis > > > > > The markings are similar to one that I came across a couple of months ago= , > I will check when I'm at work tomorrow. What type of package is it? > Regards > James > > -- > http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .