On Sat, Jan 11, 2014 at 8:42 AM, Robert Dvoracek wro= te: > Assuming the pulse transformer is all that has gone wrong (which it > probably isn't) and you are unable to find a replacement, it should be > possible to wind new coils on the original and get it working again. > > All you have to do is count the number of turns as they come off, note > the pinout, direction, and location of the coils. Also mic the wires to > get an idea of the gauge needed for the new windings. If you don't > have access to a micrometer, harbor freight sells a nice set for pretty > cheap. You could also try taking them to a local machine shop. They > will definitely have one there. Thanks for the suggestions! I am hoping to find a replacement, I don't know that I'd trust my skills at rewinding something like this when I already know there are likely other problems too. At that point, I might just redo the drive portion of the controller. Thanks! Josh -- A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools. -Douglas Adams --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .