Phil,

Are you doing this with a PIC? If so, I would be interested in more details=
..
I picked up a few of those radios and hoped to use them with a PIC.
Initially I couldn't find any libraries and didn't have time to develop my
own. I'm hoping to get back to it after the holidays.

Thanks,
Allen

> -----Original Message-----
> From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf
Of
> Phil Keller
> Sent: Sunday, December 15, 2013 1:10 PM
> To: piclist@mit.edu
> Subject: Re: [EE] nRF24L01+ configuration
>=20
> Bingo!  That was it.  I was using the default Auto Retransmission Delay
> of 250uSec.  Setting it to 500uSec eliminated the "lost" packet
> problem.  I'll let it run for a couple of days to ensure that it is
> solid but worst case I step up to 750uSec.
>=20
>    Thank you very much for the suggestion.
>=20
> -Phil-
>=20
> On 12/15/2013 9:34 AM, Veronica Merryfield wrote:
> > On Dec 15, 2013, at 9:00 AM, Phil Keller <Phil@pkeller.net> wrote:
> >
> >> I am running into a problem with my setup of a nRF24L01+ module.
> > Have you asked on the Nordic devzone forum - devzone.nordicsemi.com?
> >
> > If you are using shockburst, you may be running into time out issues,
possibly.
> >
> >
> >
>=20
> --
> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist


--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.