>  > Are you saying default analog is on?
>=20
> I would say that for *any* pin on *any* PIC that I
> have seen, that has mixed analog/digital modes, analog
> mode has always been the reset default.
>=20
> This is becuse you do not want a digital pin to be
> driven from an analog source due to the risk of
> high input currents.
>=20
> Jan-Erik.
>=20

Except when you debug with an ICD. Then the default is digital. Which is on=
e
reason it may work with a debugger but not standalone.


/Ruben

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Ruben J=F6nsson
AB Liros Electronic
Box 9124
200 39 Malm=F6 Sweden
www.liros.se
Tel +46 40142078
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.