It shows a picture of  "A single-sided wiring pattern for an Arduino micro
controller was printed on a transparent sheet of coated PET film."

Is it even possible to solder to it? I wonder if they tried printing on
kapton.


On Tue, Nov 12, 2013 at 1:20 PM, IVP <joecolquitt@clear.net.nz> wrote:

>
> http://www.news.gatech.edu/2013/11/05/georgia-tech-develops-inkjet-based-=
circuits-fraction-time-and-cost
>
> Researchers from Georgia Tech, the University of Tokyo and
> Microsoft Research have developed a novel method to rapidly
> and cheaply make electrical circuits by printing them with
> commodity inkjet printers and off-the-shelf materials. For about
> $300 in equipment costs, anyone can produce working electrical
> circuits in the 60 seconds it takes to print them.
>
> The technique, called instant inkjet circuits, allows the printing of
> arbitrary-shaped conductors onto rigid or flexible materials and
> could advance the prototyping skills of non-technical enthusiasts
> and novice hackers.
>
> Joe
>
> --
> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.