I have a number of JTAG devices and at the moment I'm a bit overwhelmed
with too many toys (and information). Any pointers on how to do this (see
below) would be helpful.

I have 2 D-Link 323 devices. One I have working perfectly the other
is in an odd state. Both are ARM based devices and have JTAG interfaces.
What I'd basically like to do is to copy the FLASH of the working device
and then JTAG it into the other device. But I'm not sure how to proceed.
I've read where I'd have to write a little code, JTAG it into the RAM
of the device and have the CPU send it byte by byte through the JTAG to
my computer. Then on the other device, pretty much do the opposite. Write
a program to write to the flash and then use the JTAG to write it to the
flash.

--=20
Linux Home Automation         Neil Cherry       ncherry@linuxha.com
http://www.linuxha.com/                         Main site
http://linuxha.blogspot.com/                    My HA Blog
Author of:    	Linux Smart Homes For Dummies
--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.