I appreciate the offer but that is not necessary. I will try to=20
duplicate it.

On 8/6/2013 12:16 PM, Dwayne Reid wrote:
> I'd be happy to send you a strip of little adapter boards that I made
> quite some while back.  The footprint is for a sot23-6 package and
> you can use as many or as few of the pads as you like.  Snip the
> little board from the strip, solder in some lengths of
> solid-conductor wire, and you are set to go.  The boards wind up
> being about 1/4" square but I often use my little Roper-Witney punch
> and turn them into 9/32" diameter circles instead.
>
> dwayne
>
>
> At 08:36 AM 8/6/2013, John Ferrell wrote:
>> A picture would be helpful if not too much trouble.
>>    carelessly ordered quite a few 2n7002's in a sot-23 package.
>>
>> On 8/5/2013 1:46 PM, veegee wrote:
>>> I couldn't find any logic-level MOSFETs, so what I do is just stock up
>>> on IRLML2502 and BSS138 and make a few SOT-23 adapter PCBs for
>>> breadboard use. This works out well, since I never need more than a few
>>> transistors for a prototype. Then when it's time to make the PCB, the
>>> SOT-23 footprint is a perfect fit.
>> --
>> John Ferrell W8CCW
>> To steal ideas from one person is plagiarism.
>>       To steal from many is research
>

--=20
John Ferrell W8CCW
To steal ideas from one person is plagiarism.
     To steal from many is research.


--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.