Is my counter will give me the right 10ms ?

;**********************************************************************
         ; 10ms timer function calls
;**********************************************************************
         ;....... 10ms  timer counter here.....
         timer10ms
               movf 0x0A
               btfsc STATUS,Z
                goto timer10ms


         ;....................................

         incf COUNT1, f
         movlw  .10        ;Compare count to 100 decimal
         subwf COUNT1, W        ;Store the result back in
         btfss STATUS, C        ;Is the result 0, skip if no
         goto exittimer
         clrf     COUNT1
On 29/06/2013 1:45 PM, eCHIP wrote:
> If you need a 100 mS delay with a 4 MHz PICmicro, below is the code.
>
> delay1mS	movlw .250
> 		movwf temp1
> 		clrwdt
> 		decfsz temp1,f
> 		goto $-2
> 		retlw 00
>
>
> delay100ms	movlw .100
> 		movwf temp
> 		call delay1ms
> 		decfsz temp,f
> 		goto $-2
> 		retlw 00
>
> Cheers
>
> Ravi
>
>
>> Hi, when you post to the Piclist you need to put an appropriate topic
>> tag in the subject line. This time I have added one to your message. Bob
>>
>> On Fri, Jun 28, 2013, at 10:04 PM, Electronic Consultation wrote:
>>> Guys,
>>>
>>> Am I creating a right counter for PIC ?
>>>
>>>        timer100ms
>>>                  movlw 0x64
>>>                  movwf COUNT1
>>>                  decfsz COUNT1
>>>                  return
>>>
>>> thanks

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.