I make my own boards so single sided is best but not always
realistic. I thought turning off a layer just hid it from
the view. I'll try that.

Thanks,
Allen

> -----Original Message-----
> From: piclist-bounces@mit.edu [mailto:piclist-
> bounces@mit.edu] On Behalf Of IVP
> Sent: Thursday, May 16, 2013 6:56 PM
> To: Microcontroller discussion list - Public.
> Subject: Re: [OT] a tangent on autorouters
>=20
> Hi Allen,
>=20
> unclear on a couple of things
>=20
> Is it your intention to make a single-sided board ? If so,
just
> turn the Top Layer off. ie the only layer for the
autorouter
> to work with is Bottom Layer
>=20
> If you were wanting to make a double-sided board, a board
> house would use plated-through holes, so soldering a relay
> won't be a problem
>=20
> Unless you're doing this yourself and can't do PTH at
> home (like me)
>=20
> Joe
> --
> http://www.piclist.com/techref/piclist PIC/SX FAQ & list
> archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist


--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.