On 2013-05-15, at 7:49 AM, RussellMc wrote: >> I'd solicited feedback from one of the admins before sending this, but I= apologize if it's too much of an "ad" for some tastes. One of the other ad= mins saw the enquiry and was kind enough to contribute to the campaign and = also suggested I should share with the group, so you can blame him too ;) >=20 > As a latecomer to the ask-the-admins party, it's fine by me. Oops=85sorry :-/ > If it had been mainly a crowd sourcing promo then "AD" may have been > better, but as it is, if it gets any sort of discussion going, them EE > or TECH would seem apposite. Understood. I do hope it generates some interest in a discussion=85and I'll= happily share the nuggets of 'wisdom' I've picked up along the way. Gettin= g involved in plastics/injection moulding has been 'fun'. Thanks. -m --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .