On Sun, 12 May 2013 21:07:19 -0400, you wrote:

>Hi all (especially Mike Harrison because I have seen some of his Youtube
>vids about high speed cameras),
>
>I recently acquired an Olympus Encore motion analysis system on eBay. It
>has an Encore MAC-8000S camera as well as the camera controller/video
>recorder unit and a whole bunch of accessories.
>
>It looks to be in good shape and the seller shows still photos which make
>it seem that it is working. However, I am finding that the video has a
>tremendous amount of noisy but mostly periodic "banding" through it. I
>suspect either a power supply problem or a bad connection - possibly in th=
e
>cable between the camera and the control unit.
>
>I am looking especially for the pinout of either end of the cable which
>connects the control unit to the camera. Does anyone have that info or kno=
w
>where I might find it?

Never heard of this camera - bear in mind that high-speed cams have some co=
mpromises on image
quality to get the maximum speed.=20
PSUs are always a good place to start

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.