>=20
> This is pretty much the same process as the one I follow....although I we=
nt
> all-out and bought some of those little antistatic snap-together containe=
rs
> from Schenzen for parts :)
>=20
> It's definitely a lot easier, quicker and more precise to get your parts =
setup
> in cups/containers and use a "cheat sheet" with the board ref IDs mapped =
to
> the containers! At first I had strips of 0603s on the table and would pee=
l
> back the backing, reveal a part, try and place it, lose it, peel back a b=
it
> more....you get the idea.
>=20
> Good advice.
>=20

Isn't it strange that most components end up upside down when you take (or =
pour=20
when you need lots at once) them out of the containers?=20

That probably isn't true, but it sure feels like that.

/Ruben

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Ruben J=F6nsson
AB Liros Electronic
Box 9124
200 39 Malm=F6 Sweden
www.liros.se
Tel +46 40142078
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.