This is not always true.  My EasyPIC7 board has two 8 pin
dip sockets and two 18 pin dip sockets, each with different
pinout and various jumpers to adjust the pinout of other
sockets.

Allen

-----Original Message-----
From: piclist-bounces@mit.edu
[mailto:piclist-bounces@mit.edu] On Behalf Of Kerry
Wentworth
Sent: Saturday, April 13, 2013 7:01 PM
To: Microcontroller discussion list - Public.
Subject: Re: [PIC] Pin-outs for 16F628 and 12C5X

MicroChip is consistent within packages as far as I know.
All 18 pin=20
DIPs have MCLR on pin 4, for example.  So, the pinout of the
18 pin DIP=20
16F628 will be the same as the 16F84.  This seems to hold
true for SSOP,=20
SOIC etc, as well as DIP.
If you've seen one indoor shopping plaza, you've seen the
Mall.

Kerry


Martin McCormick wrote:
> 	The problem I am having has nothing to do with the
age
> of these PIC's but relates to how modern documentation is
done.
>
> 	As a computer user who is blind, I actually do a lot
of
> the same things anybody else does which is to download the
PDF
> of the respective data sheet, use a PDF reader, and read
the
> specifications which help one decide how to program the
PIC,
> which port would be best for the job and how to use the
> resources.
>
> 	While the diagrams of the various modules are
useful,
> they are not essential as long as one understands what
they do.
> You either use it or make sure it is off, etc.
>
> 	The one diagram, however, which is absolutely a
> show-stopper if gotten wrong is the pin-out. After all,
you get
> VCC and ground mixed up, you'v got smoke or at least a
ruined
> chip.
>
> 	When I read the pin-outs, it all comes out screwy,
to
> use a scholarly term, and I haven't figured out any
fool-proof
> way to unscramble the puzzle. Here's how the pin-out for
the
> PIC16F628 DIP package came out:
>
> PIC16F627A/628A/648A
> Pin Diagrams
> PDIP, SOIC
> RA2/AN2/VREF RA3/AN3/CMP1 RA4/T0CKI/CMP2 RA5/MCLR/VPP VSS
RB0/INT RB1/RX/DT RB2/TX/CK RB3/CCP1
> 1 PIC16F627A/628A/648A 2 3 4 5 6 7 8 9 27A/628A/648A
> 18 17 16 15 14 13 12 11 10
> RA1/AN1 RA0/AN0 RA7/OSC1/CLKIN RA6/OSC2/CLKOUT VDD
RB7/T1OSI/PGD RB6/T1OSO/T1CKI/PGC RB5 RB4/PGM
> RA1/AN1 RA0/AN0 RA7/OSC1/CLKIN RA6/OSC2/CLKOUT VDD VDD
RB7/T1OSI/PGD RB6/T1OSO/T1CKI/PGC RB5 RB4/PGM
>
> 	That is from 40044f.pdf and appears just before Page
1.
>
> 	Does anyone know of any text-based documentation
> anywhere that might list these such that one can make
heads or
> tails of the mess?
>
> 	Something like
>
> 9 GND
> 18 VCC
>
> would work just fine.
>
> 	I even read this on a Macintosh using preview and it
> came out a little better than the Linux pdf reader named
> pdftotext, but it still did not give anything one could
trust.
>
> 	As you can see in the example, the ASCII text is
> recoverable and I have no trouble reading it, but the
formatting
> and order is lost so I don't even sort of trust what goes
where.
>
> 	I even read the header files for the 16F628 and
12C58JW
> parts to see if somebody had stuck somethin in there, but
no
> such luck.
>
> 	For now, I need the pin-outs for those two specific
> PIC's, but the best solution is to find a way to get this
> information that doesn't waste other people's time so I am
open
> for suggestions.
>
> 	I think back about ten years ago when I first got in
to
> PIC's, it was fighting the documentation battle that made
me get
> side-tracked and start doing other things. The one PIC I
did
> program was a 16F84 and it worked exactly as it should. A
whole
> breadboard full of TTL logic shrank in to one little chip.
>
> 	Anyway, thanks for any help as the rest of what I
need
> to do is just program the chips and stick them in to the
> projects I have for them.
>
> Martin McCormick WB5AGZ
>  =20

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list
archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist


--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.