Have you disabled the comparators ??

CMCON disable can be either 0x00 or 0x07

Mr Smiley :o)

--- On Mon, 4/2/13, Nicola Perotto <nicola@nicolaperotto.it> wrote:

> From: Nicola Perotto <nicola@nicolaperotto.it>
> Subject: Re: [PIC] Re: PIC16F88
> To: "Microcontroller discussion list - Public." <piclist@mit.edu>
> Date: Monday, 4 February, 2013, 23:43
> Hi,
>=20
> On Mon, Feb 4, 2013, at 07:27 AM, mircea2012 wrote:
> >> Hy.
> >>
> >> I have a question about port B PIC16F88 mcu.
> >> I try to flashing the eight leds of port B with a
> delay of 1 sec (trisb=3D0
> >> -
> >> all pins are outputs).
> >> I can't to setup the last 2 pins of port B like an
> outputs. I sure that
> >> they
> >> can be set like an output because in electrical
> drawings is specified.
> The last 2 pins of Port B are also used to connect the
> programmer (and you
> used...).
>=20
> >> These 2 pins also can be setup like an analog
> channel. To deactivate to
> >> work
> >> like an analog channel I set the=20
> >> ansel=3D0; (digital I/O) but the compiler does not
> recognize the ansel
> >> register. What is the corect syntax ?
> Which language/compiler are you using?
>=20
> >> Also i deactivate RB Port Change Interrupt Enable
> bit, but the pins RB7
> >> and
> >> RB6 are always ON.=20
> >> Can somebaody give some tips ?
> Why can try but remember that we need more exaustive
> informations also!
>=20
> --=20
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>=20

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.