Matt Bennett wrote:
> I'm looking for the 2x13 square post header connectors for a board that
> would mount directly to a Raspberry Pi, connecting to the I/O connector.=
=20
> I've got some "female" headers, but they are only about 0.25" high- not
> enough to clear the various connectors on the RPi.
>
> I've seen some connectors that are meant to be stacking- such as are on
> the I/O boards that are available for the Digilent MAX32- But I can't see=
m
> to find how to actually call these connectors-
It seems that unfortunately every vendor has their own name for=20
connectors even when the connectors are mechanically virtually identical.

When I did a board I ened up using a Samtec esq series connector (they=20
come in various heights) but it was quite pricey.

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.