Hi Matt,

Look here:

http://picru.st/

There's a parts list with link to the connector at Mouser.

Best regards,

Bob

On Mon, Jan 28, 2013, at 05:46 PM, Matt Bennett wrote:
> I'm looking for the 2x13 square post header connectors for a board that
> would mount directly to a Raspberry Pi, connecting to the I/O connector.=
=20
> I've got some "female" headers, but they are only about 0.25" high- not
> enough to clear the various connectors on the RPi.
>=20
> I've seen some connectors that are meant to be stacking- such as are on
> the I/O boards that are available for the Digilent MAX32- But I can't
> seem
> to find how to actually call these connectors- essentially long pin
> female
> headers- possibly wire-wrap? However, I look for wire-wrap headers on
> digi-key, they are freakishly expensive.
>=20
> For some PIC content here- the board I'm building has a PIC32 on it,
> talking to the RPi via SPI. It also has some switchers, as I noticed that
> the RPi tended to overwhelm the 5V USB adapters I tried. Can anyone point
> me in the right direction?
>=20
> It is my plan to ultimately to open up the design/source.


--=20
http://www.fastmail.fm - Choose from over 50 domains or use your own

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.