--_002_fcrfs9xdm6ln2skaterswarbrick_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Mike Hord <mike.hord@gmail.com> writes:
> IIRC LVP uses an alternate pin to the reset pin to activate reset mode,
> removing the need for a high-voltage signal.
>
> Sounds like, in this case, RA5 is the pin used for that purpose.
>
> Mike H

Ahah! Page 2 of

  http://ww1.microchip.com/downloads/en/DeviceDoc/41390D.pdf

in fact. It didn't occur to me to check that document. Oh well, another
gotcha to remember. Thank you very much for explaining what's going on.

Rupert

--_002_fcrfs9xdm6ln2skaterswarbrick_
Content-Type: text/plain; name="ATT00001.txt"
Content-Description: ATT00001.txt
Content-Disposition: attachment; filename="ATT00001.txt"; size=208;
	creation-date="Tue, 15 Jan 2013 11:57:21 GMT";
	modification-date="Tue, 15 Jan 2013 11:57:21 GMT"
Content-Transfer-Encoding: base64

LS0gDQpodHRwOi8vd3d3LnBpY2xpc3QuY29tIFBJQy9TWCBGQVEgJiBsaXN0IGFyY2hpdmUNClZp
ZXcvY2hhbmdlIHlvdXIgbWVtYmVyc2hpcCBvcHRpb25zIGF0DQpodHRwOi8vbWFpbG1hbi5taXQu
ZWR1L21haWxtYW4vbGlzdGluZm8vcGljbGlzdA0K

--_002_fcrfs9xdm6ln2skaterswarbrick_--
.