Would drilling and tapping an M6 one be feasible?

On 10/24/2012 11:42 AM, alan.b.pearce@stfc.ac.uk wrote:
>> Think about mounting with a T-Nut and improvise a shaft extension...
> He said earlier that they have 'non-standard 8 x 0.75 threads' and I don'=
t know if they make T-nuts with M8x0.75 threads. The chart I looked at list=
s that as a fine thread, and I suspect the normal one is M8x1, although tha=
t is also listed as fine, and M8x1.25 is listed as coarse!
>
> I suspect looking at the T-Nuts I have that such things are normally made=
 with the coarse thread for the thread size.
>

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.