Added a subject ^^^

Couldn't you modify the power-supply by adding whatever protection =20
circuit to a small thin, long-if-necessary PCB in the middle of the =20
power cord, and heat-shrink it over?  I've done something similar =20
(different purpose) and used 1.5" heat shrink over it.  I found 4:1 =20
shrink at Digikey, which brought the ends pretty nicely closed.

Cheers,
-Neil.


Quoting David VanHorn <microbrix@gmail.com>:

> All good suggestions, IF I could modify the existing circuits.
>
> What I need, is a power supply brick, to replace the existing power
> supply brick, that won't keep hammering a failed circuit.
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>



--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.