Serial (UART) communications require oscillator precision better than 2%,

Isaac



Em 25/09/2012 02:48, Lee Mulvogue escreveu:
> =20
>
> 	I'd always read in the past to not use the internal OSC of a PIC as
> it was too innacurate, but am now wondering if this is still the case
> for a PIC24F?=20
>
> 	I've just started making a board based on a PIC24FJ64GA004 (my first
> time with a 24F), and added the usual 20MHz crystal and supporting
> caps; but are the modern PICs accurate enough to start considering
> dumping this external setup?  The most time sensitive thing I'm doing
> is interrupting @ 16kHz for PCM sound playback (current sample to PWM
> output, set flag for Main loop to process the next sample), and simple
> RS232 comms.  The datasheet seems to indicate a max variation of +/-
> 5%, but I don't have a benchmark to compare that against.=20
>
> 	I'd possibly be running the 8Mhz internal with the 4x PLL multiplier,
> resulting in 16MIPS, vs the 10MIPS of the external 20MHz crystal
> without PLL.=20
>
> 	Thoughts?=20
>
> 	Lee
>
> -------------------------
> Msg sent via Webmail - http://hosting.myob.com/

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.