John Gardner wrote 2012-09-04 23:37:
> I have 8.73 installed; my PicKit 2 lists both versions of the '1825,
> but MPLAB IDE tells me the device is not supported by the PK2
> and disconnects it..

It *is* supported by MPLAB as such.
It *is* supported by the "PICkit2 application".
It is *not* supported by the builtin PICkit2 driver in MPLAB.

This has been so all the time with most PIC16F1xxx devices.

No problem, just run the "PICkit2 Application" and enable
automatic HEX-file polling and burning...

>
> Spent the morning digging in the 8.87 release notes (see below)
> trying to determine if <that> IDE supports the '1825 <AND> the
> PK2, with no luck.
>
> "Devices Supported.htm" seems to be the current disinformation.
> And, it's wrong about the PK2 / '1825...
>
> http://www.microchip.com/stellent/idcplg?IdcService=3DSS_GET_PAGE&nodeId=
=3D1406&dDocName=3Den019469&part=3DSW007002
>

Check :

http://www.microchip.com/stellent/idcplg?IdcService=3DSS_GET_PAGE&nodeId=3D=
1406&dDocName=3Den027813

and look for "1825" under "PICkit 2 Programmer Application v2.61".

Jan-Erik.

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.