....specifically a small unit with 2 momentary switches, but something=20
"finished" that an end-user can stick on a dash or center console.  So=20
far I've made a few of these with a small PCB, a couple of tact=20
switches, and a machined plastic housing, but it's very time-consuming=20
to make the housings.  I need about 50-100 of these, and really dreading=20
the thought of machining all of these housings, so hoping to find=20
something commercial.

I'm picturing something like a thin membrane switch or one of those=20
small remote controls (but wired).  Even if I can find something that=20
was originally intended for another product, I can put a new label on=20
it.  I remember something very similar on the outside of a toy box some=20
years ago and it had the switch panel stuck outside the box with "try=20
me" on it.  When opened, the switch unplugged from the toy and thrown away.

If I found 2 individual switches that could be neatly stuck together or=20
screwed together, that would work.  Any leads?

Thanks,
-Neil.


--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.