This does not however save me any space over the discrete (mosfet + 2=20
resistors) method.  The discrete solution has a slight advantage over=20
being able to tuck the components into bare spots on the board also.

I was asking as perhaps someone may have had some cool trick to do this=20
with just a pull-up or something perhaps.

Cheers,
-Neil.


  On 8/7/2012 9:45 AM, William Bross wrote:
> Have you considered trying a SN74LVC2G07DBVR and a couple of pull up=20
> resistors? Pull up to appropriate level on each output. Run the G07=20
> off either the 3.3V or 5V. That gets you down to 3 parts total. I've=20
> been using this method to interface my PICs to Digi's Rabbit modules=20
> for years and it works well. Bill=20

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.