Yes, I know, in those PICs that has the *ECCP* module !

But e.g. the 12F683 (with the CCP module) has the same
writing in the "Compare mode" section even if it the
0010 option does *not* work i those PICs (that is, all
PICs with the older CCP module)...

I can not see it as anything but a documentation error.

Jan-Erik.


cdb wrote 2012-08-06 08:19:
> In the CCP section, "Compare mode", it says :
>
> When a match occurs, the CCP1 module may:
> - Toggle the CCP1 output.      <<<=3D=3D=3D  Note!
> - Set the CCP1 output.
> - Clear the CCP1 output.
>
> The compare mode with toggle output on match is 0010 - see page 129 of
> PIC16F631 and family (includes the 690) DS4126D   2007.
>
> Colin
> --
> cdb, colin@btech-online.co.uk on 6/08/2012
>
> Web presence: www.btech-online.co.uk
>
> Hosted by:  www.justhost.com.au
>
>
> This email is to be considered private if addressed to a named  individua=
l
> or Personnel Department, and public if addressed to a blog,  forum or new=
s
> article.
>
>
>
>
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.