OK.

It now seems as this a difference between the CCP and
the ECCP modules.

Thanks all.

Jan-Erik.



Matt Callow wrote 2012-08-03 13:35:
> What about:
> 0010 =3D Compare mode, toggle output on match (CCP1IF bit is set)
>>From page 127 of 41262E.pdf
>
> Matt
>
> On 3 August 2012 20:46, Jan-Erik Soderholm <jan-erik.soderholm@telia.com>=
 wrote:
>> Hi.
>>
>> Checked datasheet for 12F683 and 16F690.
>>
>> In the CCP section, "Compare mode", it says :
>>
>> When a match occurs, the CCP1 module may:
>> - Toggle the CCP1 output.      <<<=3D=3D=3D  Note!
>> - Set the CCP1 output.
>> - Clear the CCP1 output.
>> ...
>> The action on the pin is based on the value of the
>> CCP1M<3:0> control bits of the CCP1CON register.
>>
>>
>> Now, the table for the CCP1CON register says :
>>
>> 1000 =3D Compare mode, set output on match (CCP1IF bit is set)
>> 1001 =3D Compare mode, clear output on match (CCP1IF bit is set)
>>
>> There is no "toggle output on match" option there
>>
>> Is this a (known) datasheet error?
>> There is nothing in the errata documents.
>>
>> Jan-Erik.
>> --
>> http://www.piclist.com PIC/SX FAQ & list archive
>> View/change your membership options at
>> http://mailman.mit.edu/mailman/listinfo/piclist
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.