Hi.

Checked datasheet for 12F683 and 16F690.

In the CCP section, "Compare mode", it says :

When a match occurs, the CCP1 module may:
- Toggle the CCP1 output.      <<<=3D=3D=3D  Note!
- Set the CCP1 output.
- Clear the CCP1 output.
....
The action on the pin is based on the value of the
CCP1M<3:0> control bits of the CCP1CON register.


Now, the table for the CCP1CON register says :

1000 =3D Compare mode, set output on match (CCP1IF bit is set)
1001 =3D Compare mode, clear output on match (CCP1IF bit is set)

There is no "toggle output on match" option there

Is this a (known) datasheet error?
There is nothing in the errata documents.

Jan-Erik.
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.