On Thu, Aug 2, 2012 at 8:27 PM, Joe Wronski wr= ote: > That was my immediate thought. There should be DSI hardware available > at some point, as a quick search indicates: > > I designed a carrier board for a compilab cmx-270 at one time, and > configuration was as simple as choosing the correct LCD header file, or > editing it. This might be a different interface though. Should be > do-able for someone with a bit of time for research. Unless there comes a modification to Raspbian that will use GPIO's as the touch panel/screen interface, it's probably the -ancient- DSI interface. > > I set up a cross-compile environment on a Debian virtual machine last > night and was able to actually build the kernel. Getting that onto an > SD card and working will be another story. This would be to cut down > the kernel size and eliminate unneeded modules and peripheral firmware > to squeeze it onto smaller cards. > What are your requirements , which modules did you include ? If it's not a commercial one, I might like to check it out. --=20 http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .