I have 3 Nutone, PAR Sunlight/fan units for 35 years here, and I think 2=20
of the bulbs are still original. The fan and light are controlled=20
separately. The unit has a roughly square (rounded corners) aluminum=20
bezel with a 3/8" gap to the PAR that is roughly flush with the bezel.

On 7/17/2012 9:27 PM, Justin Richards wrote:
> Have had two globes, 1 x 100 watt and 1 x 275 watt explode in a
> "Bathroom Heaters&  Exhaust Fan with Light" over the last couple of
> days.
>
> Suspect it is because the heater lights can be turned on without the
> fan running.  I am unable to find the install instructions on the web
> so i cant be sure if it has been installed incorrectly.  Anyone know
> for sure if the fan should be wired so it must come on if the heater
> light is on.
>
> Google seems to indicate that exploding lights might be more common
> than I initially thought but no mention of bathroom heater lights.
>
> Justin
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.