> Now I just gotta figure out what to do with this beastie!
> Anyone else get one yet?

It's on my desk. I put a serial bootloader on it, connected an FT232 and=20
a PFET for power switching. Now I can download and run fully hands-off.=20
Totally bare metal. So far I can blink a LED.

I used David Welch's github entry at https://github.com/dwelch67 as a=20
guide. The bootloader his, with some changes. I added xmodem to xwisp,=20
maybe I'll add it to lpc21isp (if the onwer agrees). I used the=20
startupfiles from a Linux distro, so my bootloader is loaded at 0x0, not=20
at 0x8000 as happens with the boot files he used.

--=20

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products
docent Hogeschool van Utrecht: www.voti.nl/hvu
C++ on uC blog: http://www.voti.nl/erblog



--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.