> Looking for something to help me get started with USB device and slave,=20
> plus SD-card development with a PIC32.  I generally prefer to make a=20
> custom board (compact and purpose-built), but that will take me a few=20
> weeks and I want to get started on this ASAP.
>=20
> Microchip's Explorer16 will work, but pricey once I get the correct PIM=20
> and expansion boards.  Their USB starter kit is very nice (and $55 is=20
> great), but the only option I've seen for SD card with that is to get=20
> the $250 multimedia expansion board.  So I'm shopping around elsewhere=20
> now... any recommendations from other sources?
>=20
> Cheers,
> -Neil.
>=20

If you are going to use the Microchip libraries, I suggest that you use a b=
oard=20
that has code written for it in the demos for the library you are going to =
use.

It makes the initial hardware setup so much easier.

/Ruben


=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Ruben J=F6nsson
AB Liros Electronic
Box 9124
200 39 Malm=F6 Sweden
www.liros.se
Tel +46 40142078
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.