At 15.05 2012.06.22, you wrote:
>> Now I have to buy and try with the vibration damper tape (between=20
>the ECU and the
>> mounting plate, which then is attached to the bike's frame through 2 rub=
ber
>> washers), higher g's accel, different RC constant, DSP.. I will be=20
>busy a bit. :D
>
>OK, I wonder if the rubber washers are just too hard, and end up=20
>transmitting the vibration to the box.=20
>
>Is there a metal tube through the middle of the washer

Yes, attached to the frame.


>so you don't over compress it when tightening the screw?

So I don't have to tighten them too tight? :D


>--=20
>Scanned by iCritical.
>
>--=20
>http://www.piclist.com PIC/SX FAQ & list archive
>View/change your membership options at
>http://mailman.mit.edu/mailman/listinfo/piclist

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.