>I sometimes do a lot of wood working where you have to transfer
> large patterns to wood for scroll work, very intricate patterns and
> the current method is to print out the pattern and then use carbon
> paper to trace that onto the wood, it can take a couple hours to
> transfer some of the designs

Mark,

I'll be interested in whatever you come up with. I have a similar
need and I don't like using adhesive to stick paper patterns to the
wood. Accurate but messy. Something like a pantograph with
steppers and a laser would be fairly simple

One thought I had last week but haven't tried yet is perhaps the
toner-transfer method I use for PCBs. Transfering the toner
would be easy enough, but getting the paper off without soaking
the wood might be the tricky bit. Perhaps steaming or a wet
towel

Joe

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.