Ah, so you are the one who read it all then!=20

You must tell me what it says someday.

-Jim


-----Original Message-----
From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf Of
Goran Hosinsky
Sent: 21 May 2012 15:53
To: Microcontroller discussion list - Public.
Subject: Re: [PIC] 16F287 power connections

Thanks! I would say that the problem is not the datasheet but my reading=20
of the 300+ pages.
Goran

On 2012-05-21 09:46, Jan-Erik Soderholm wrote:
> Hi.
>
> All pins should be connected, that is what they are there for.
> I thought the datasheet was clear on that point, maybe not. :-)
>
> Jan-Erik.
>
>
> Goran Hosinsky wrote 2012-05-21 09:14:
>> Must VDD and VSS be connected to both sides of the 40 pin 16F887 or is
>> one side enough? VDD is on pin 11 and 32, VSS on 12 and 31.
>> Goran, Canary Islands
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.