Or a Turnigy Accucel 6, charges and balances up to 6S at 5A, discharges
and supports Li-xx, Ni-xx and Pb chemistries.
Just around $23.


Isaac



Em 14/5/2012 20:04, Lee Mulvogue escreveu:
> =20
>
> 	Or you could just buy a Turnigy 3S balancer and charger for $4.50,
> does pretty-much exactly this.  Back-order at the moment though.=20
>
> 	http://www.hobbyking.com/hobbyking/store/__7637__Turnigy_balancer_Charge=
r_2S_3S.html
> [1]
> 	> I suggested a module made up of a lithium charger IC, a switching
>  > mechanism that could isolate those batteries in the chain
> (envisaging no
>  > more than 3) once they've charged and some form of electronic load
>  > (probably a FET). It has been proposed that each battery could have
> its
>  > own switch controller and thinking about this a small Pic or Atmel
> chip
>  > could be used to provide the intelligent switching per battery with
> the
>  > charger/battery gauge chip providing the correct charging
> algorithm, the
>  > controller chip would either switch it out of the pack chain or
>  > alternatively switch in the active load to maintain that particular
> battery
>  > charge state.
>  >
>  > Does this seem workable in theory?
> -------------------------
> Msg sent via Webmail - http://hosting.myob.com/
>
> Links:
> ------
> [1]
> http://www.hobbyking.com/hobbyking/store/__7637__Turnigy_balancer_Charger=
_2S_3S.html

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.