I mis-read the "few ohms" part of the resistance range and thought the=20
range was 20-25.
Joe W


On 5/11/2012 9:44 PM, Neil wrote:
> I suspect putting two resistors this much apart together in parallel
> would result in a significant linearity issue, and a resulting
> resolution issue at one end of the range.
>
> That 77 should be below 27 I bet though.
>
> Cheers,
> -Neil.
>
>
> On 5/11/2012 7:00 PM, Joe Wronski wrote:
>> Do the math for putting a 1K digital pot in parallel with a 27 ohm
>> resistor.  I don't trust my quick try which says the pot should vary
>> from 77 to 338 ohms, which would not be a resolution problem, would it?
>> Joe W
>>
>>

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.