On Tue, Apr 24, 2012 at 3:52 AM, cdb wrote: > The only annoyance at this moment is, no screw holes, so it's either by = a > box or maybe 3 sticky feet will do the job. > > Sockets are stiff and as someone has already done, it is very easy to > unmount the electrolytic (C1) when removing the power cable, there is a > tendency to hold the little blighter to gain leverage. > > I'm mulling over getting hold of a TI HDMI/DVI to RGB converter chip (I > think it's a TFP410 or TFP401) and then I can drive a standard LCD monito= r > raw panel. PCB would be a nuisance though, TI recommend 4 layer with > complicated ground planes and it's a 100 pin mini TQFP, perhaps not doabl= e > after all. > Can you post a few pictures? I'm curious. --=20 http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .