On Wed, Apr 11, 2012 at 07:38:17PM +0200, Wouter van Ooijen wrote:
> On 11/4/2012 7:20 PM, Neil wrote:
> > Hi all,
> >
> > Can any of you recommend a D-to-A converter with a single-wire
> > digital-side interface?  As small as possible -- roughly SOT23-5 to
> > SSOP-8 would be good, 5V powered, 0-5V output (I'll actually do 0.5V to
> > 4.5V output with it).
>=20
> I'd opt for a PIC. UART in, PWM out.

Why not do software PWM on the existing I/O pin then? All that is needed is=
=20
a low pass filter.

BAJ

>=20
> --=20
>=20
> Wouter van Ooijen
>=20
> -- -------------------------------------------
> Van Ooijen Technische Informatica: www.voti.nl
> consultancy, development, PICmicro products
> docent Hogeschool van Utrecht: www.voti.nl/hvu
> C++ on uC blog: http://www.voti.nl/erblog
>=20
> --=20
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist

--=20
Byron A. Jeff
Department Chair: IT/CS/CNET
College of Information and Mathematical Sciences
Clayton State University
http://cims.clayton.edu/bjeff
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.