thanks...I'll check those guys out.=A0 Appreciate the info!



----- Original Message -----
From: William Bross <wbross@cinci.rr.com>
To: Microcontroller discussion list - Public. <piclist@mit.edu>
Cc:=20
Sent: Monday, March 5, 2012 1:37 PM
Subject: Re: [OT] besides MillMax who makes spring loaded pins?

alan smith wrote:

>I have a spring loaded pin that I'm trying to find, its from an existing d=
esign and there is no information about the BOM
>
>It is
>8mm long
>the body where the pin compresses is 4mm x 1.5mm
>the pin is 1.4mm x .9mm
>the thru hole is 2.3mm x .64mm
>
>Mill Max doesn't appear to have a match, its smaller than what they have t=
o offer, or best I can tell it is.
>
>=A0=20
>
Alan,

If this is a 'pogo' style pin, try=A0 IDI at: <http://www.idinet.com/> or=20
Everett Charles Tech at: <http://www.ectinfo.com/>

Good Luck,
Bill


--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist


--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.