> -----Original Message-----
> From: piclist-bounces@mit.edu On Behalf Of alan smith
> Sent: Monday, March 05, 2012 2:39 PM
>
> I have a spring loaded pin that I'm trying to find, its from an
> existing design and there is no information about the BOM
>
> It is
> 8mm long
> the body where the pin compresses is 4mm x 1.5mm
> the pin is 1.4mm x .9mm
> the thru hole is 2.3mm x .64mm
>
> Mill Max doesn't appear to have a match, its smaller than what
> they have to offer, or best I can tell it is.

It might be made by, Interconnect Devices, Inc. http://www.idinet.com/

Even if they aren't the OEM, I'd bet they have a replacement that fits.

They are the preferred supplier at work, we've been using them since the
80s.

Paul Hutch

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.