Hi,

I have put together two 12V SLA battery based power supplies for an IP
cameras that has a 5 V and a 48 V DC converter.   For protection I have a
500mA slow blow fuse and about 375 mA average draw.

One of the two power supplies has had it's fuse blow after a short period o=
f
time (maybe 30 turn ons and 40 hours operating time).   The other is workin=
g
OK so far.

The DC-DC converters have a electrolytic caps on their input and output.
The is several hundred uF of capacitance.

I think what is blowing the fuse is the inrush current.  I know that there
is a noticeable spark when I touch the battery power lead to the circuit.

Are there rules that I should be following to size the fuse properly?  I'm
concerned about reliability.

Thanks,

Gordon Williams

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.