> How thick?

> And http://www.pololu.com/catalog/product/749=20

4mm or 6mm, which Pololu say they can do with laser

http://www.pololu.com/docs/0J24/3#cannot_cut

I've challenged Laserstream because this page says they DO cut
acrylic and polycarbonate

http://www.hsmeng.co.nz/profile-cutting/laser/

Laserstream did say that fine details will be lost, understandable, so
I've asked them how fine is "fine". If it's to 0.4mm or better resolution
(Pololu) then that's quite acceptable

Joe=20

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.