I've searched for crimpers in the past for various brands/models of =20 similar connectors, and the manufactuers make them, but they are =20 *expensive*! I chose Hirose DF13 & DF3 connectors as Digikey provides =20 pre-crimped wires/terminals in various lengths/colors -- much better =20 than the >$1000 crimper. There are some lower-cost aftermarket/universal crimpers that can =20 crimp a handful of other-brand terminals, but I've never found a =20 definitive cross-reference on those. Similarly some crimpers for a =20 specific brand/model of terminal may crimp another brand/model of =20 terminal, but I've found no way to know for sure unless I buy/try. Cheers, -Neil. Quoting David : > On 19/02/2012 22:18, Bob Ammerman wrote: >> This looks suspiciously like the connector that matches a NIMH battery p= ack >> that several of us got for free several years ago through the PIC list. = If >> they match then I have a bunch (100+?) of the male connector (right angl= e >> mount tho') and a whole large (20KG+) box of battery packs with the matc= hing >> connector on them. > > Out of interest if these were not available, it is easy enough to crimp > them? > > Any recommendations for good crimpers would be gladly received, thus far > I've relied on 0.1" 2xN headers with ribbon cable but those sorts of SIL > headers are much nicer. > > David > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > --=20 http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .