I have made molds from fiberglass that work well. The surface must be=20
very smooth, catalyzed paint (not solvent like mineral spirits) like a=20
fine auto finish, and well waxed. In the craft area there are mold=20
materials available of all varieties. Try searching internet for that.

You don't say how many you need to make, and how quickly. Careful of=20
fast setting epoxies, they exotherm, and boil causing foaming in=20
anything but thin layers.

What are using for epoxy and filler? I like the West epoxy with micro=20
balloons,  milled glass fiber or flox (milled cotton) for filler=20
depending on usage. If interested in this, I can supply more info.

Can you use Bondo (Polyester auto body filler). It's cheap, cures=20
quickly, and is sand-able finish-able,

On 2/14/2012 8:13 AM, RussellMc wrote:
>> I'm looking for an inexpensive sheet material that I can use for
>> epoxy molds.  I have a product that is an epoxy blob about 1.5" x
>> 1.1" by 0.5" thick.  I need to find a faster way of making these epoxy b=
lobs.
>>     =20
>   =20
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.