You might have to do a little experimenting to test that the material
you use is inert. Epoxy curing can be upset by some plastics (including
the binder in wood products), as any fumes or residual monomer given
off can interfere with the curing and leave the surface sticky. In extreme
cases the fumes can penetrate quite deeply and the result will be very
unsatisfactory. The reason I suggested laminating film and silicone, which
I use for both polyester, which is very aggressive, and epoxy, which can
be sensitive
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.