arghhh.... there was a bad character! :-( www.atmel.com/dyn/resources/prod_documents/doc8003.pdf ----- Original Message -----=20 From: "YES NOPE9" To: "Microcontroller discussion list - Public." Sent: Wednesday, February 08, 2012 10:39 PM Subject: Re: [EE] increasing sensitivity of a thermistor >> >> On Feb 8, 2012, at 10:10 AM, MarcoG wrote: >> >> >> Hi Mike, I have an old code snippet related to your first suggestion >> (oversampling). It was from Basic Micro forum but now I don't see it=20 >> anymore >> on the web. I don't know if this code is valid or not, however I attach= =20 >> it >> if anyone interested. >> >> Also the guy who has written this says that a pre-requirement is at >> least 1 LSB of noise on ADC reading. In this example the resolution is >> declared as increased from 10 to 16bit, but real resolution may be lower= .. >> >> a good Appnote for ADC oversampling: >> www.atmel.com/dyn/resources/prod-documents/doc8003.pdf > The requested page cannot be found. > The page you have requested might have moved or has been archived. Please= =20 > use our Product Finder or site search to locate your document or page. >> >> regards, >> Marco > > > > --=20 > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist=20 --=20 http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .