Actually, I was checking out the SeeedStudios Fusion PCB Service
yesterday, basically they fit your designs on spare parts of their
production boards, seems ENIG coating is only $15 more on ANY of their
sizings=20

	So 10x 5x5cm boards are $10, plus $15 for ENIG - that's $2.50 each
for a dual-layer gold board! (I haven't looked into the shipping yet)=20

	Didn't see a size mentioned in the original post, but Seeed could be
worth a look.  For Sean's 6inch x  6 inch (15cm x 15cm) it would work
out as $130 - FOR 10 BOARDS!=20

	Lee
  Gold is a standard coating. I've never added it to a simple PCB but
on
 more complex ones (6-layer, heavy copper, etc.) it wasn't a
 significant cost adder in a prototype run. I would guess that you
 could get 2-layer 6 inch by 6 inch gold-coated PCBs for something
like
 $400 total for qty 2, and maybe $100 each for qty 5, $70 each for qty
 10, etc.
 Sean

-------------------------
Msg sent via Webmail - http://hosting.myob.com/
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.