> Hi,
>=20
> Does anyone have any working knowledge of the RF transceiver?
>=20
> The spec sheet is contradictory, and VERY lacking in programming detail.
> EG: (Initialization...)
> 1.  Set FIFORSTREG.  (WHAT does that mean?  There are 8 bits, which ones =
need to be
> set?)

FIFO Reset Register? - I guess writing anything to this register resets the=
 FIFO to empty.

> 2.  Enable sync. Latch (from) FIFORSTREG.  (I can figure this one out.) (=
Why
> does it require two operations on the same register?)

Hmm, same register, but presumably needs a certain bit pattern for that ope=
ration, that is different to the reset bit pattern above - which sort of su=
ggest my interpretation of the register name is nonsense ...
>=20
> So seriously, is there a REAL spec sheet, not written by the analog guys?
> (I'm using DS70590B)

Hmm, following from the Microchip Home Page/Zigbee/Datasheets and hovering =
mouse over datasheet link suggests there is a Rev C dated 29-Nov-2011 ...

Maybe time for an update.
--=20
Scanned by iCritical.

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.