On 23/01/12 11:09, Mike Harrison wrote:
> Have you checked if it's possible to rotate the connector on the LA? Filt=
ered IEC inlets are often
> symmetrical.

It looks like it's possible, but it's right up against the aluminium
corner-angle, which is a meaty thing supported by the subframe. Getting
to the nut on the 'far' side would involve removing the motherboard and
backplanes. To do that, you have to pull the power supply brick and HCI
controller card (if present, which it isn't in this one)

> Failing that I'd suggest cutting down a rewirable connector and sealing u=
p with hotmelt

If you're suggesting what I think you're suggesting... ick. There is no
way that'll come anywhere near meeting electrical safety regs.... O_O

--=20
Phil.
piclist@philpem.me.uk
http://www.philpem.me.uk/
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.